MoldPositionLayout
Sample Distribution Charts
Color Distribution
Material Distribution
Origin Distribution
| Photo | Generation | Molds | InsideLogoStyle | InsideRibStyle | MoldIdentificationLayout | MoldPositionStyle | PatPendLayout | PatPendStyle | StudLogoStyle | StudRecessStyle | InsideLogoOrientation | PipStyle | BottomStyle |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
04 - Dogbone | 3 | Dogbone | None | None | Typed | None | None | None | None | Top To Bottom | Single Cornered Narrow Bottom Edge | None |
 |
11 - Tubeless - No logo inside - corner pip | 6 | None | Across | None | Typed | None | None | Wide Straight 'O' | Large sloped (3mm) | None | Single Cornered Narrow Bottom Edge | None |
 |
12 - Tubeless - No logo inside - wide center pip | 4 | None | Across | None | Typed | None | None | Wide Straight 'O' | Large sloped (3mm) | None | Centered Wide Bottom Edge | None |
 |
13 - Tubeless - No logo inside - other pips | 1 | None | None | None | Typed | None | None | Wide Straight 'O' | Large (3mm) | None | Stud | None |
| 21 - Old logo - 3mm stud recess - corner-pip | 6 | None | None | None | Typed | None | None | Wide Straight 'O' | Large (3mm) | None | Double Cornered Narrow Bottom Edge | Cross-support | |
| 23 - Old logo - smaller stud recess - corner-pip - no mold-id | 4 | None | None | None | None | None | None | Wide Straight 'O' | Small (2-2,2mm) | None | Double Cornered Narrow Bottom Edge | Cross-support | |
 |
24 - Tall wide straight 'O' - corner pip - smaller stud recess | 10 | None | None | None | Typed | None | None | Tall Wide Straight 'O' | Small (2-2,2mm) | None | Double Cornered Narrow Bottom Edge | Cross-support |
 |
25 - Old logo - smaller stud recess - centered pip - no mold-id | 1 | None | None | None | Typed | None | None | None | Small (2-2,2mm) | None | Centered Side Surface | Cross-support |
| 32 - Old logo - 2x2 with mold identifiers | 6 | None | None | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | None | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | |
| 33 - Old logo - 2x3 with mold identifiers | 5 | None | None | Right (Top To Bottom) | Typed | Top+Bottom (right-aligned) | Normal | Wide Round 'O' | Small (2-2,2mm) | None | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | |
| 34 - Old logo - 2x4 with mold identifiers | 5 | None | None | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | None | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | |
 |
40 - Narrow Straight 'O' without mold identifiers | 1 | None | None | None | Typed | None | None | Narrow Straight 'O' | Small (2-2,2mm) | None | Double Cornered Narrow Bottom Edge | Cross-support |
 |
41 - Narrow Straight 'O' 1x6 with mold identifiers | 2 | None | None | Right (Top To Bottom) | Typed | None | None | Narrow Straight 'O' | Small (2-2,2mm) | None | Single Cornered Narrow Bottom Edge | Cross-support |
 |
42 - Narrow Straight 'O' 1x8 with mold identifiers | 6 | None | None | Right (Top To Bottom) | Typed | None | None | Narrow Straight 'O' | Small (2-2,2mm) | None | Single Cornered Narrow Bottom Edge | Cross-support |
04 - Dogbone (1954-1954)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | InsideLogoOrientation | Associations |
|---|---|---|---|---|---|---|---|
 |
04a | Overlapping numbers | 16 / 16 | Single Cornered Narrow Bottom Edge | None | Top To Bottom | |
 |
04b | Non-overlapping numbers | 13 / 13 | Single Cornered Narrow Bottom Edge | None | Left To Right | |
 |
04h | 1x6+1x8 With cross-support | 12 / 12 | Double Cornered Narrow Bottom Edge | Cross-support | Left To Right |
11 - Tubeless - No logo inside - corner pip (1956-1957)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | InsideRibStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|---|---|
 |
11a | 2x8 Single pip | 8 / 8 | Single Cornered Narrow Bottom Edge | Cross-support | Across | Large (3mm) | 11b (Matching patterns - only differs by number of pips) |
 |
11b | 2x8 Double pip | 8 / 8 | Double Cornered Narrow Bottom Edge | Cross-support | Across | Large (3mm) | 11a (Matching patterns - only differs by number of pips) |
 |
11f | 2x4 Sloped stud recesses | 20 / 20 | Single Cornered Narrow Bottom Edge | None | Across | Large sloped (3mm) | |
 |
11g | 2x4 Normal stud recesses | 20 / 20 | Single Cornered Narrow Bottom Edge | None | Across | Large (3mm) | |
 |
11h | 2x3 Sloped stud recesses | 21 / 21 | Single Cornered Narrow Bottom Edge | None | Across | Large sloped (3mm) | |
 |
11i | 2x3 Normal stud recesses | 18 / 18 | Single Cornered Narrow Bottom Edge | None | None | Large (3mm) |
12 - Tubeless - No logo inside - wide center pip (1956-1957)
| Photo | CatId | Mold | Members | InsideRibStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|
 |
12a | Serif pos. numbers - shorter pip width | 22 / 22 | Across | Large sloped (3mm) | 12b (Matching patterns - only differs by pip-witdth) |
 |
12b | Serif pos. numbers - wider pip width | 22 / 22 | Across | Large sloped (3mm) | 12a (Matching patterns - only differs by pip-witdth) |
 |
12c | SanSerif pos. numbers - mold 1 | 22 / 22 | Mixed | Large (3mm) | 12d (Matching patterns) |
 |
12d | SanSerif pos. numbers - mold 2 | 22 / 22 | Mixed | Large (3mm) | 12c (Matching patterns) |
13 - Tubeless - No logo inside - other pips (1956-1957)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
13a | Pip on stud | 11 / 11 |
21 - Old logo - 3mm stud recess - corner-pip (1958-1959)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | PatPendLayout | PatPendStyle | Associations |
|---|---|---|---|---|---|---|---|---|
| 21a | 2x4 - Mold number left - pip right | 14 / 14 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Top+Bottom (centered) | Normal | ||
 |
21al | 1x6 Cross support Large Hole Numbered | 12 / 12 | Double Cornered Narrow Bottom Edge | Cross-support | None | None | |
 |
21an | 1x8 Cross support Large stud recess Weak numbers | 12 / 12 | Double Cornered Narrow Bottom Edge | Cross-support | None | None | |
 |
21ao | 1x8 Cross support Large stud recess Bold numbers | 12 / 12 | Double Cornered Narrow Bottom Edge | Cross-support | None | None | |
| 21b | 2x4 - Mold number left - pip left | 18 / 18 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Top+Bottom (centered) | Normal | ||
| 21s | 2x2 - Pos. left of tube | 6 / 6 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Top+Bottom (centered) | Normal |
23 - Old logo - smaller stud recess - corner-pip - no mold-id (1958-1959)
| Photo | CatId | Mold | Members | PipStyle | BottomStyle | MoldPositionStyle | PatPendLayout | PatPendStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|
 |
23ad | 1x6 Cross support Small Hole Numbered Bold | 1 / 1 | Double Cornered Narrow Bottom Edge | Cross-support | None | None | None | |
 |
23ae | 1x8 Cross support Small hole Unnumbered Short wide stud-logo | 8 / 8 | Double Cornered Narrow Bottom Edge | Cross-support | Typed | None | None | |
| 23d | 2x4 - mold id left bottom to top #1 | 20 / 20 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Typed | Top+Bottom (centered) | Normal | ||
| 23e | 2x4 - mold id left bottom to top #2 | 1 / 1 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | Typed | Top+Bottom (centered) | Normal |
24 - Tall wide straight 'O' - corner pip - smaller stud recess (1958-1959)
| Photo | CatId | Mold | Members | BottomStyle | PatPendLayout | PatPendStyle | Associations |
|---|---|---|---|---|---|---|---|
| 24c | 2x8 double pip left - pat pend left | 8 / 8 | Tubes With Cross-support | Right | Normal | ||
| 24d | 2x8 double pip right - pat pend left | 8 / 8 | Tubes With Cross-support | Right | Normal | ||
| 24e | 2x8 double pip left - pat pend nearer center | 8 / 8 | Tubes With Cross-support | Left | Normal | ||
 |
24f | 1x6 Cross support Small Hole Numbered Normal Pip left Logo Bottom Up | 8 / 8 | Cross-support | None | None | |
 |
24g | 1x6 Cross support Small Hole Numbered Normal Pip left Logo Top Down | 8 / 8 | Cross-support | None | None | |
 |
24h | 1x6 Cross support Small Hole Numbered Normal Pip Right | 8 / 8 | Cross-support | None | None | |
 |
24i | 1x8 Cross support Small hole Unnumbered Tall wide stud-logo | 1 / 1 | Cross-support | None | None | |
 |
24j | 1x8 Cross support Small hole Numbered | 8 / 8 | Cross-support | None | None | |
 |
24k | 1x8 Cross support Small hole Numbered Rotated logo | 1 / 1 | Cross-support | None | None | |
 |
24l | Copy of 1x8 Cross support Small hole Numbered Glossy inside | 8 / 8 | Cross-support | None | None |
25 - Old logo - smaller stud recess - centered pip - no mold-id (1960-1965)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
25c | 1x6 Wide round logo | 1 / 1 |
32 - Old logo - 2x2 with mold identifiers (1960-1965)
| Photo | CatId | Mold | Members | MoldIdentificationLayout | StudLogoStyle | Associations |
|---|---|---|---|---|---|---|
| 32c2 | 2x2 - C-mold 2 - Small mold-id right | 28 / 28 | Right (Top To Bottom) | Wide Straight 'O' | ||
| 32f | 2x2 - F-mold | 2 / 2 | Right (Top To Bottom) | Wide Round 'O' | ||
| 32j | 2x2 - J-mold | 32 / 32 | Right (Bottom To Top) | Wide Round 'O' | ||
| 32k | 2x2 - K-mold | 34 / 34 | Right (Bottom To Top) | Wide Round 'O' | ||
| 32l | 2x2 - L-mold | 36 / 36 | Right (Bottom To Top) | Wide Round 'O' | 32l2 (Matching pattern - rotated 180 deg) | |
| 32l2 | 2x2 - L-mold 2 - Pip right | 2 / 2 | Right (Bottom To Top) | Wide Round 'O' | 32l (Matching pattern - rotated 180 deg) |
33 - Old logo - 2x3 with mold identifiers (1960-1965)
| Photo | CatId | Mold | Members | MoldPositionStyle | Associations |
|---|---|---|---|---|---|
| 33d1 | 2x3 - D-mold 1 (Plain) | 24 / 24 | Typed | 33d2 (Matching pattern - rotated 180 deg) | |
| 33d2 | 2x3 - D-mold 2 (Rotated stud-logo) | 24 / 24 | Typed | 33d1 (Matching pattern - rotated 180 deg) | |
| 33e | 2x3 - E-mold | 2 / 2 | Typed | ||
| 33h1 | 2x3 - H-mold (Plain) | 22 / 22 | Typed | ||
| 33h2 | 2x3 - H-mold (Hand-written) | 1 / 1 | Hand-written |
34 - Old logo - 2x4 with mold identifiers (1960-1965)
| Photo | CatId | Mold | Members | MoldIdentificationLayout | StudLogoStyle | Associations |
|---|---|---|---|---|---|---|
| 34f2 | 2x4 - F-mold 2 - Mold identifier right | 20 / 20 | Right (Top To Bottom) | Wide Straight 'O' | ||
| 34h1 | 2x4 - H-mold 1 | 20 / 20 | Right (Top To Bottom) | Wide Straight 'O' | 34h2 (Matching pattern - rotated 180 deg) | |
| 34h2 | 2x4 - H-mold 2 - Rotated 180 deg. | 6 / 6 | Right (Top To Bottom) | Wide Straight 'O' | 34h1 (Matching pattern - rotated 180 deg) | |
| 34v1 | 2x4 - V-mold 1 | 22 / 22 | Right (Bottom To Top) | Wide Round 'O' | 34v2 (Matching pattern - rotated 180 deg) | |
| 34v2 | 2x4 - V-mold 2 - Rotated 180 deg. | 1 / 1 | Right (Bottom To Top) | Wide Round 'O' | 34v1 (Matching pattern - rotated 180 deg) |
40 - Narrow Straight 'O' without mold identifiers (1965-1970)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
40a | 1x8 | 2 / 2 |
41 - Narrow Straight 'O' 1x6 with mold identifiers (1958-1970)
| Photo | CatId | Mold | Members | PipStyle | Associations |
|---|---|---|---|---|---|
 |
41c1 | Cross support C-mold Corner pip | 10 / 10 | Single Cornered Narrow Bottom Edge | |
 |
41c2 | Cross support C-mold Center pip | 10 / 10 | Centered Side Surface |
42 - Narrow Straight 'O' 1x8 with mold identifiers (1958-1970)
| Photo | CatId | Mold | Members | PipStyle | PatPendLayout | PatPendStyle | Associations |
|---|---|---|---|---|---|---|---|
 |
42b | 1x8 Cross support Small hole B-mold | 12 / 12 | Single Cornered Narrow Bottom Edge | None | None | |
 |
42c1 | 1x8 Cross support Small hole C-mold Cornered pip | 10 / 10 | Single Cornered Narrow Bottom Edge | None | None | |
 |
42c2 | 1x8 Cross support C-mold Centered pip Aligned logos | 10 / 10 | Centered Side Surface | None | None | |
 |
42c3 | 1x8 Cross support C-mold Centered pip Rotated logos | 10 / 10 | Centered Side Surface | None | None | |
 |
42d1 | 1x8 Cross support D-mold Stud-logo bottom to top | 12 / 12 | Centered Side Surface | Left | Normal | |
 |
42d2 | 1x8 Cross support D-mold Stud-logo top to bottom | 12 / 12 | Centered Side Surface | Left | Normal |
| Generations | Molds | MoldMembers |
|---|---|---|
| 14 | 60 | 770 |